| TUBING AND NOZZLE
INSTALLATION:
Note: Nozzle
instructions are for Hago and pre-assembled Slimline. If your
nozzles are not pre-assembled, click here for nozzle assembly
instructions.
|
A.
Place 1/4 inch clamp over
tubing.
 |
B.
Secure clamp to surface.
 |
|
C. Cut tubing
to proper length
 |
D.
Insert tubing into nozzle
until
you
feel two clicks.
 |
|
E. Place a a nylon
3/8” clamp on
each side of the nozzle
base .
|
F.
Attach nozzles to surface.
 |
|
G. Turning
corners can be accomplished by simply bending
the flexible tubing.
 |
|
|
Home
